The radial fans of the serie CH4/3RLB220K-1400K are middle pressure fans with direct drive, suitable for clean air, a casing made of steel with an epoxid-powder coated surface and a flowtechnically optimized inlet cone. The impeller is a centrifugal impeller, welded and has backward curved blades, is balanced statically and dynamically G=6,3 acc. to ISO 1940/1 and is available for clean air to 180°C. The impeller hub is mounted directly on the motor shaft maintenance-free. We use IEC-standard motors in IP55 ISO F, 230/400V or 400/690V, or every special voltage is available. Accessories like vibration dampers, flexible connections, inlet filter, inlet protection grill, silencer... are available. more >>>>

The radial fans of the serie CH4/4RLB220K-1400K are middle pressure fans with direct drive, suitable for clean air, a casing made of steel with an epoxid-powder coated surface and a flowtechnically optimized inlet cone. The impeller is a centrifugal impeller, welded and has backward curved blades, is balanced statically and dynamically G=6,3 acc. to ISO 1940/1 and is available for clean air to 180°C. The impeller hub is mounted directly on the motor shaft maintenance-free. We use IEC-standard motors in IP55 ISO F, 230/400V or 400/690V, or every special voltage is available. Accessories like vibration dampers, flexible connections, inlet filter, inlet protection grill, silencer... are available. more >>>>

High pressure blowers with direct drive motor, a steel housing with an epoxy powder-coated surface and an aerodynamically optimized inlet nozzle. The impeller is a centrifugal impeller in welded design and forward-curved blades, statically and dynamically balanced G = 6.3 according to ISO 1940/1, suitable for clean air and flue gases (Code K) to 180 ° C. The impeller hub is maintenance-free mounted on the motor shaft. We use IEC standard motors in IP55 F insulation, 230/400V or 400/690V, or any special voltage can be supplied. more >>>>

High pressure blowers with direct drive motor, a steel housing with an epoxy powder-coated surface and an aerodynamically optimized inlet nozzle. The impeller is a centrifugal impeller in welded design and forward-curved blades, statically and dynamically balanced G = 6.3 according to ISO 1940/1, suitable for clean air and flue gases (Code K) to 180 ° C. The impeller hub is maintenance-free mounted on the motor shaft. We use IEC standard motors in IP55 F insulation, 230/400V or 400/690V, or any special voltage can be supplied. more >>>>

High pressure blowers with direct drive motor, a steel housing with an epoxy powder-coated surface and an aerodynamically optimized inlet nozzle. The impeller is a centrifugal impeller in welded design and forward-curved blades, statically and dynamically balanced G = 6.3 according to ISO 1940/1, suitable for clean air and flue gases (Code K) to 180 ° C. The impeller hub is maintenance-free mounted on the motor shaft. We use IEC standard motors in IP55 F insulation, 230/400V or 400/690V, or any special voltage can be supplied. more >>>>

High pressure blowers with direct drive motor, a steel housing with an epoxy powder-coated surface and an aerodynamically optimized inlet nozzle. The impeller is a centrifugal impeller in welded design and forward-curved blades, statically and dynamically balanced G = 6.3 according to ISO 1940/1, suitable for clean air and flue gases (Code K) to 180 ° C. The impeller hub is maintenance-free mounted on the motor shaft. We use IEC standard motors in IP55 F insulation, 230/400V or 400/690V, or any special voltage can be supplied. more >>>>

High pressure blowers with direct drive motor, a steel housing with an epoxy powder-coated surface and an aerodynamically optimized inlet nozzle. The impeller is a centrifugal impeller in welded design and forward-curved blades, statically and dynamically balanced G = 6.3 according to ISO 1940/1, suitable for clean air and flue gases (Code K) to 180 ° C. The impeller hub is maintenance-free mounted on the motor shaft. We use IEC standard motors in IP55 F insulation, 230/400V or 400/690V, or any special voltage can be supplied. more >>>>

High pressure blowers with direct drive motor, a steel housing with an epoxy powder-coated surface and an aerodynamically optimized inlet nozzle. The impeller is a centrifugal impeller in welded design and forward-curved blades, statically and dynamically balanced G = 6.3 according to ISO 1940/1, suitable for clean air and flue gases (Code K) to 180 ° C. The impeller hub is maintenance-free mounted on the motor shaft. We use IEC standard motors in IP55 F insulation, 230/400V or 400/690V, or any special voltage can be supplied. more >>>>

The mounting fan serie CH5/2RLB220K-800K with a pressure side flange, a direct drive motor, a steel housing with an epoxy powder-coated surface and an aerodynamically optimized inlet nozzle. The impeller is a centrifugal impeller in welded design and backward curved blades, statically and dynamically balanced G = 6.3 according to ISO 1940/1 and for temperatures to 250 ° C. The impeller hub is maintenance-free mounted on the motor shaft. We use IEC standard motors in IP55 F insulation, 230/400V or 400/690V, or any special voltage can be supplied. These types of fans are mainly used as Kesselzuluftventilatoren, burner fan, engine cooling fan, ... used with direct pressure or suction-side-side mounting more >>>>

The mounting fan serie CH5/3RLB220K-800K with a pressure side flange, a direct drive motor, a steel housing with an epoxy powder-coated surface and an aerodynamically optimized inlet nozzle. The impeller is a centrifugal impeller in welded design and backward curved blades, statically and dynamically balanced G = 6.3 according to ISO 1940/1 and for temperatures to 250 ° C. The impeller hub is maintenance-free mounted on the motor shaft. We use IEC standard motors in IP55 F insulation, 230/400V or 400/690V, or any special voltage can be supplied. These types of fans are mainly used as Kesselzuluftventilatoren, burner fan, engine cooling fan, ... used with direct pressure or suction-side-side mounting more >>>>

The mounting fan serie CH5/4RLB220K-800K with a pressure side flange, a direct drive motor, a steel housing with an epoxy powder-coated surface and an aerodynamically optimized inlet nozzle. The impeller is a centrifugal impeller in welded design and backward curved blades, statically and dynamically balanced G = 6.3 according to ISO 1940/1 and for temperatures to 200 ° C. The impeller hub is maintenance-free mounted on the motor shaft. We use IEC standard motors in IP55 F insulation, 230/400V or 400/690V, or any special voltage can be supplied. These types of fans are mainly used as Kesselzuluftventilatoren, burner fan, engine cooling fan, ... used with direct pressure or suction-side-side mounting more >>>>

The mounting fan serie CH5/2HDB310-1000(K) with a pressure side flange, a direct drive motor, a steel housing with an epoxy powder-coated surface and an aerodynamically optimized inlet nozzle. The impeller is a centrifugal impeller in welded design and backward curved blades, statically and dynamically balanced G = 6.3 according to ISO 1940/1 and for temperatures to 180 ° C. The impeller hub is maintenance-free mounted on the motor shaft. We use IEC standard motors in IP55 F insulation, 230/400V or 400/690V, or any special voltage can be supplied. These types of fans are mainly used as Kesselzuluftventilatoren, burner fan, engine cooling fan, ... used with direct pressure or suction-side-side mounting more >>>>

High pressure blowers with direct drive motor, a steel housing with an epoxy powder-coated surface and an aerodynamically optimized inlet nozzle. The impeller is a centrifugal impeller in welded design and forward-curved blades, statically and dynamically balanced G = 6.3 according to ISO 1940/1, suitable for clean air and flue gases (Code K) to 180 ° C. The impeller hub is maintenance-free mounted on the motor shaft. We use IEC standard motors in IP55 F insulation, 230/400V or 400/690V, or any special voltage can be supplied. more >>>>

The mounting fan serie CH5/3HDB310-1000(K) with a pressure side flange, a direct drive motor, a steel housing with an epoxy powder-coated surface and an aerodynamically optimized inlet nozzle. The impeller is a centrifugal impeller in welded design and backward curved blades, statically and dynamically balanced G = 6.3 according to ISO 1940/1 and for temperatures to 180 ° C. The impeller hub is maintenance-free mounted on the motor shaft. We use IEC standard motors in IP55 F insulation, 230/400V or 400/690V, or any special voltage can be supplied. These types of fans are mainly used as Kesselzuluftventilatoren, burner fan, engine cooling fan, ... used with direct pressure or suction-side-side mounting more >>>>

The mounting fan serie CH5/4HDB250-1000(K) with a pressure side flange, a direct drive motor, a steel housing with an epoxy powder-coated surface and an aerodynamically optimized inlet nozzle. The impeller is a centrifugal impeller in welded design and backward curved blades, statically and dynamically balanced G = 6.3 according to ISO 1940/1 and for temperatures to 180 ° C. The impeller hub is maintenance-free mounted on the motor shaft. We use IEC standard motors in IP55 F insulation, 230/400V or 400/690V, or any special voltage can be supplied. These types of fans are mainly used as Kesselzuluftventilatoren, burner fan, engine cooling fan, ... used with direct pressure or suction-side-side mounting more >>>>

The mounting fan serie CH5/5HDB310-1000(K) with a pressure side flange, a direct drive motor, a steel housing with an epoxy powder-coated surface and an aerodynamically optimized inlet nozzle. The impeller is a centrifugal impeller in welded design and backward curved blades, statically and dynamically balanced G = 6.3 according to ISO 1940/1 and for temperatures to 180° C. The impeller hub is maintenance-free mounted on the motor shaft. We use IEC standard motors in IP55 F insulation, 230/400V or 400/690V, or any special voltage can be supplied. These types of fans are mainly used as Kesselzuluftventilatoren, burner fan, engine cooling fan, ... used with direct pressure or suction-side-side mounting more >>>>

The mounting fan serie CH5/6HDB310-1000(K) with a pressure side flange, a direct drive motor, a steel housing with an epoxy powder-coated surface and an aerodynamically optimized inlet nozzle. The impeller is a centrifugal impeller in welded design and backward curved blades, statically and dynamically balanced G = 6.3 according to ISO 1940/1 and for temperatures to 180 ° C. The impeller hub is maintenance-free mounted on the motor shaft. We use IEC standard motors in IP55 F insulation, 230/400V or 400/690V, or any special voltage can be supplied. These types of fans are mainly used as Kesselzuluftventilatoren, burner fan, engine cooling fan, ... used with direct pressure or suction-side-side mounting more >>>>