The centrifugal fans of the series CH4/1HDB310-1000 are high pressure blowers with direct drive motor, a steel housing with an epoxy powder-coated surface and an aerodynamically optimized inlet nozzle. The impeller is a centrifugal impeller in welded design and forward-curved blades, statically and dynamically balanced G = 6.3 according to ISO 1940/1, suitable for clean air and flue gases (Code K) to 180 ° C. The impeller hub is maintenance-free mounted on the motor shaft. We use IEC standard motors in IP55 F insulation, 230/400V or 400/690V, or any special voltage can be supplied. more >>>

High pressure blowers with direct drive motor, a steel housing with an epoxy powder-coated surface and an aerodynamically optimized inlet nozzle. The impeller is a centrifugal impeller in welded design and forward-curved blades, statically and dynamically balanced G = 6.3 according to ISO 1940/1, suitable for clean air and flue gases (Code K) to 180 ° C. The impeller hub is maintenance-free mounted on the motor shaft. We use IEC standard motors in IP55 F insulation, 230/400V or 400/690V, or any special voltage can be supplied. more >>>

High pressure blowers with direct drive motor, a steel housing with an epoxy powder-coated surface and an aerodynamically optimized inlet nozzle. The impeller is a centrifugal impeller in welded design and forward-curved blades, statically and dynamically balanced G = 6.3 according to ISO 1940/1, suitable for clean air and flue gases (Code K) to 180 ° C. The impeller hub is maintenance-free mounted on the motor shaft. We use IEC standard motors in IP55 F insulation, 230/400V or 400/690V, or any special voltage can be supplied. more >>>

High pressure blowers with direct drive motor, a steel housing with an epoxy powder-coated surface and an aerodynamically optimized inlet nozzle. The impeller is a centrifugal impeller in welded design and forward-curved blades, statically and dynamically balanced G = 6.3 according to ISO 1940/1, suitable for clean air and flue gases (Code K) to 180 ° C. The impeller hub is maintenance-free mounted on the motor shaft. We use IEC standard motors in IP55 F insulation, 230/400V or 400/690V, or any special voltage can be supplied. more >>>

High pressure blowers with direct drive motor, a steel housing with an epoxy powder-coated surface and an aerodynamically optimized inlet nozzle. The impeller is a centrifugal impeller in welded design and forward-curved blades, statically and dynamically balanced G = 6.3 according to ISO 1940/1, suitable for clean air and flue gases (Code K) to 180 ° C. The impeller hub is maintenance-free mounted on the motor shaft. We use IEC standard motors in IP55 F insulation, 230/400V or 400/690V, or any special voltage can be supplied. more >>>

High pressure blowers with direct drive motor, a steel housing with an epoxy powder-coated surface and an aerodynamically optimized inlet nozzle. The impeller is a centrifugal impeller in welded design and forward-curved blades, statically and dynamically balanced G = 6.3 according to ISO 1940/1, suitable for clean air and flue gases (Code K) to 180 ° C. The impeller hub is maintenance-free mounted on the motor shaft. We use IEC standard motors in IP55 F insulation, 230/400V or 400/690V, or any special voltage can be supplied. more >>>

High pressure blowers with direct drive motor, a steel housing with an epoxy powder-coated surface and an aerodynamically optimized inlet nozzle. The impeller is a centrifugal impeller in welded design and forward-curved blades, statically and dynamically balanced G = 6.3 according to ISO 1940/1, suitable for clean air and flue gases (Code K) to 180 ° C. The impeller hub is maintenance-free mounted on the motor shaft. We use IEC standard motors in IP55 F insulation, 230/400V or 400/690V, or any special voltage can be supplied. more >>>

High pressure blowers with direct drive motor, a steel housing with an epoxy powder-coated surface and an aerodynamically optimized inlet nozzle. The impeller is a centrifugal impeller in welded design and forward-curved blades, statically and dynamically balanced G = 6.3 according to ISO 1940/1, suitable for clean air and flue gases (Code K) to 180 ° C. The impeller hub is maintenance-free mounted on the motor shaft. We use IEC standard motors in IP55 F insulation, 230/400V or 400/690V, or any special voltage can be supplied. more >>>

High pressure blowers with direct drive motor, a steel housing with an epoxy powder-coated surface and an aerodynamically optimized inlet nozzle. The impeller is a centrifugal impeller in welded design and forward-curved blades, statically and dynamically balanced G = 6.3 according to ISO 1940/1, suitable for clean air and flue gases (Code K) to 180 ° C. The impeller hub is maintenance-free mounted on the motor shaft. We use IEC standard motors in IP55 F insulation, 230/400V or 400/690V, or any special voltage can be supplied. more >>>

High pressure blowers with direct drive motor, a steel housing with an epoxy powder-coated surface and an aerodynamically optimized inlet nozzle. The impeller is a centrifugal impeller in welded design and forward-curved blades, statically and dynamically balanced G = 6.3 according to ISO 1940/1, suitable for clean air and flue gases (Code K) to 180 ° C. The impeller hub is maintenance-free mounted on the motor shaft. We use IEC standard motors in IP55 F insulation, 230/400V or 400/690V, or any special voltage can be supplied. more >>>